Chapter 6 Tutorials
Figure 81 VPN > IPSec VPN > VPN Connection > Add
6.4.3 How to Set Up the Policy Route for the VPN TunnelDo the following to create a policy route to have the ZyWALL send traffic through the VPN tunnel.
1Click Network > Routing > Policy Route. You want this policy route to have higher priority than the default policy route for the trunk, so click the Add icon at the top of the column, not the one next to the existing policy route.
Figure 82 Network > Routing > Policy Route
2Configure the policy route as shown next. This policy route applies to traffic from the LAN1 subnet. Use the VPN connection’s local and remote objects as the source address
146 |
| |
ZyWALL USG 100/200 Series User’s Guide |
| |
|
|
|