ZyXEL Communications 100 Series, 200 Series 6.6How to Configure Load Balancing

Chapter 6 Tutorials

Figure 97 Firewall > LAN1 to DMZ > Edit

3Click the Add icon at the top of the rule list to create a rule for one of the user groups that is allowed to access the DMZ.

4Select one of the user groups that is allowed to access the DMZ, and click OK.

Figure 98 Firewall > Add

5Repeat this process to set up firewall rules for the other user groups that are allowed to access the DMZ.

6.6How to Configure Load Balancing

The following example shows how to set up a trunk for two WAN connections (to the Internet). The available bandwidth for the connections is 1Mbps (wan1) and 512 Kbps (wan2) respectively. As these connections have different bandwidth, you have decided to use the Weighted Round Robin algorithm and to send traffic to wan1 and wan2 in a 2:1 ratio.

Figure 99 Trunk Example

wan1: 1 Mbps

wan2: 512 Kbps

154
	ZyWALL USG 100/200 Series User’s Guide