Chapter 7 Status

The following table describes the labels in this screen.

Table 37 Status > DHCP Table

LABEL

DESCRIPTION

Interface

Select for which interface you want to look at the IP addresses currently assigned

 

to DHCP clients and the IP addresses reserved for specific MAC addresses.

 

 

#

This field is a sequential value, and it is not associated with a specific entry.

 

 

IP Address

This field displays the IP address currently assigned to a DHCP client or reserved

 

for a specific MAC address.

 

 

Host Name

This field displays the name used to identify this device on the network (the

 

computer name). The ZyWALL learns these from the DHCP client requests. You

 

can use CLI commands to set this value for static DHCP entries.

 

 

MAC Address

This field displays the MAC address to which the IP address is currently assigned

 

or for which the IP address is reserved.

 

 

Reserve

If this field is selected, this entry is a static DHCP entry. The IP address is reserved

 

for the MAC address.

 

If this field is clear, this entry is a dynamic DHCP entry. The IP address is assigned

 

to a DHCP client.

 

To create a static DHCP entry using an existing dynamic DHCP entry, select this

 

field, and then click Apply.

 

To remove a static DHCP entry, clear this field, and then click Apply.

 

 

Apply

Click this to save your settings to the ZyWALL.

 

 

Refresh

Click this to update the screen immediately.

 

 

7.2.6 The Port Statistics Screen

Use this screen to look at packet statistics for each Gigabit Ethernet port. To access this screen, click Port Statistics in the Status screen.

Figure 133 Status > Port Statistics

180

 

ZyWALL USG 100/200 Series User’s Guide