Appendix A Log Descriptions

Table 301 Interface Logs (continued)

LOG MESSAGE

DESCRIPTION

 

 

Interface %s links An administrator set a static gateway in interface but this interface is

down. Default route link down. At this time the configuration will be saved but route will not

will not apply until take effect until the link becomes up.1st %s: interface name, 2nd %s: interface %s links up. interface name.

name=%s,status=%s,TxP

Port statistics log. This log will be sent to the VRPT server.

kts=%u,

1st %s: physical port name, 2nd %s: physical port status, 1st %u:

RxPkts=%u,Colli.=%u,T

physical port Tx packets, 2nd %u: physical port Rx packets, 3rd %u:

xB/s=%u,

physical port packets collisions, 4th %u: physical port Tx Bytes/s, 5th

RxB/s=%u,UpTime=%s

%u: physical port Rx Bytes/s, 3rd %s: physical port up time.

name=%s,status=%s,TxP

Interface statistics log. This log will be sent to the VRPT server.

kts=%u,

1st %s: interface name, 2nd %s: interface status, 1st %u variable:

RxPkts=%u,Colli.=%u,T

interface Tx packets, 2nd %u variable: interface Rx packets, 3rd %u:

xB/s=%u,

interface packets collisions, 4th %u: interface Tx Bytes/s, 5th %u:

RxB/s=%u

interface Rx Bytes/s.

Interface %s start

A PPP or aux interface started dialing to a server. %s: interface name.

dailing.

 

Interface %s connect

A PPTP interface failed to connect to the PPTP server. %s: interface

failed: Connect to

name.

server failed.

 

Interface %s

A PPP or AUX connection will terminate. %s: interface name.

connection

 

terminated.

 

Interface %s

An idle PPP or AUX connection timed out.1%s: interface name.

connection

 

terminated: idle

 

timeout.

 

Interface %s connect

MS-CHAPv2 authentication failed (the server must support mS-

failed: MS-CHAPv2

CHAPv2 and verify that the authentication failed, this does not include

mutual authentication

cases where the servers does not support MS-CHAPv2). %s: interface

failed.

name.

 

Interface %s connect

MS-CHAP authentication failed (the server must support MS-CHAP

failed: MS-CHAP

and verify that the authentication failed, this does not include cases

authentication

where the server does not support MS-CHAP). %s: interface name.

failed.

 

Interface %s connect

CHAP authentication failed (the server must support CHAP and verify

failed: CHAP

that the authentication failed, this does not include cases where the

authentication

server does not support CHAP). CHAP: interface name.

failed.

 

Interface %s is

A PPP or AUX interface connected successfully. %s: interface name.

connected.

 

Interface %s is

A PPP or AUX interface disconnected successfully. %s: interface

disconnected.

name.

Interface %s connect

The interface’s connection will be terminated because the server did

failed: Peer not

not send any LCP packets. %s: interface name.

responding.

 

Interface %s connect

PAP authentication failed (the server must support PAP and verify

failed: PAP

verify that the authentication failed, this does not include cases where

authentication

the server does not support PAP). %s: PPP interface name.

failed.

 

 

807

ZyWALL USG 100/200 Series User’s Guide