Chapter 43 System

Table 240 System > SSH (continued)

LABEL

DESCRIPTION

Service Control

This specifies from which computers you can access which ZyWALL zones.

 

 

#

This the index number of the service control rule.

 

 

Zone

This is the zone on the ZyWALL the user is allowed or denied to access.

 

 

Address

This is the object name of the IP address(es) with which the computer is allowed or

 

denied to access.

 

 

Action

This displays whether the computer with the IP address specified above can

 

access the ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).

 

 

Add icon

Click the Add icon in the heading row to open a screen where you can add a new

 

rule. Refer to Table 239 on page 682 for information on the fields.

 

Click the Edit icon to go to the screen where you can edit the rule.

 

Click the Add icon in an entry to add a rule below the current entry.

 

Click the Delete icon to remove an existing rule. A window display asking you to

 

confirm that you want to delete the rule. Note that subsequent rules move up by

 

one when you take this action.

 

Click the Move to N icon to display a field to type a number for where you want to

 

put that rule and press [ENTER] to move the rule to the number that you typed.

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

43.7.5 Secure Telnet Using SSH Examples

This section shows two examples using a command interface and a graphical interface SSH client program to remotely access the ZyWALL. The configuration and connection steps are similar for most SSH client programs. Refer to your SSH client program user’s guide.

43.7.5.1 Example 1: Microsoft Windows

This section describes how to access the ZyWALL using the Secure Shell Client program.

1Launch the SSH client and specify the connection information (IP address, port number) for the ZyWALL.

2Configure the SSH client to accept connection using SSH version 1.

3A window displays prompting you to store the host key in you computer. Click Yes to continue.

Figure 517 SSH Example 1: Store Host Key

Enter the password to log in to the ZyWALL. The CLI screen displays next.

692

 

ZyWALL USG 100/200 Series User’s Guide