ZyXEL Communications 100 Series, 200 Series 33.3.1 The Anti-SpamPolicy Add or Edit Screen

	Chapter 33 Anti-Spam
Table 177 Anti-X > Anti-Spam > General
LABEL	DESCRIPTION
Add icon	Click the Add icon in the heading row to add a new first entry.
	The Active displays whether the entry is enabled or not. Click it to activate or
	deactivate the entry. Make sure you click Apply to save and apply the change.
	Click the Edit icon to go to the screen where you can edit the entry on the ZyWALL.
	Click the Add icon in an entry to add an entry below the current entry.
	Click the Remove icon to delete an existing entry from the ZyWALL. A window
	displays asking you to confirm that you want to delete the entry. Note that
	subsequent entries move up by one when you take this action.
	In a numbered list, click the Move to N icon to display a field to type an index
	number for where you want to put that entry and press [ENTER] to move the entry
	to the number that you typed. For example, if you type 6, the entry you are moving
	becomes number 6 and the previous rule 6 (if there is one) gets pushed up (or
	down) one.
	The ordering of your policies is important as they are applied in order of their
	numbering.
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to begin configuring this screen afresh.

33.3.1 The Anti-Spam Policy Add or Edit Screen

Click the Add or Edit icon in the Anti-X> Anti-Spam > General screen to display the configuration screen as shown next. Use this screen to configure an anti-spam policy that controls what traffic direction of e-mail to check, which e-mail protocols to scan, the scanning options, and the action to take on spam traffic.

Figure 423 Anti-X > Anti-Spam > General > Add

	563
ZyWALL USG 100/200 Series User’s Guide