ZyXEL Communications 100 Series, 200 Series manual 672

Chapter 43 System

Table 233 System > DNS (continued)

LABEL	DESCRIPTION
Domain Zone	A domain zone is a fully qualified domain name without the host. For example,
	zyxel.com.tw is the domain zone for the www.zyxel.com.tw fully qualified domain
	name.
	A “*” means all domain zones.
From	This displays whether the DNS server IP address is assigned by the ISP
	dynamically through a specified interface or configured manually.
DNS Server	This is the IP address of a DNS server. This field displays N/A if you have the
	ZyWALL get a DNS server IP address from the ISP dynamically but the specified
	interface is not active.
Add icon	Click the Add icon in the heading row to open a screen where you can add a new
	domain zone forwarder record. Refer to Table 235 on page 675 for information on
	the fields.
	Click the Edit icon to go to the screen where you can edit the record.
	Click the Add icon in an entry to add a record below the current entry.
	Click the Delete icon to remove an existing record. A window display asking you to
	confirm that you want to delete the record. Note that subsequent records move up
	by one when you take this action.
	Click the Move to N icon to display a field to type a number for where you want to
	put that record and press [ENTER] to move the record to the number that you
	typed.
MX Record (for	A MX (Mail eXchange) record identifies a mail server that handles the mail for a
My FQDN)	particular domain.
#	This is the index number of the MX record.
Domain Name	This is the domain name where the mail is destined for.
IP/FQDN	This is the IP address or fully qualified domain name of a mail server that handles
	the mail for the domain specified in the field above.
Add icon	Click the Add icon in the heading row to open a screen where you can add a new
	MX record. Refer to Table 236 on page 675 for information on the fields.
	Click the Edit icon to go to the screen where you can edit the record.
	Click the Delete icon to remove an existing record. A window display asking you to
	confirm that you want to delete the record. Note that subsequent records move up
	by one when you take this action.
Service Control	This specifies from which computers and zones you can send DNS queries to the
	ZyWALL.
#	This the index number of the service control rule. The ordering of your rules is
	important as rules are applied in sequence.
	The entry with a hyphen (-) instead of a number is the ZyWALL’s (non-configurable)
	default policy. The ZyWALL applies this to traffic that does not match any other
	configured rule. It is not an editable rule. To apply other behavior, configure a rule
	that traffic will match so the ZyWALL will not have to use the default policy.
Zone	This is the zone on the ZyWALL the user is allowed or denied to access.
Address	This is the object name of the IP address(es) with which the computer is allowed or
	denied to send DNS queries.

672
	ZyWALL USG 100/200 Series User’s Guide