Appendix A Log Descriptions

 

Table 289 IKE Logs (continued)

 

LOG MESSAGE

DESCRIPTION

 

 

Tunnel [%s] Sending

%s is the tunnel name. The device sent an IKE request.

 

 

IKE request

 

 

 

Tunnel [%s] IKE

%s is the tunnel name. When IKE request is already sent but still

 

 

Negotiation is in

attempting to dial a tunnel.

 

 

process

 

 

 

VPN gateway %s was

%s is the gateway name. An administrator disabled the VPN gateway.

 

 

disabled

 

 

 

VPN gateway %s was

%s is the gateway name. An administrator enabled the VPN gateway.

 

 

enabled

 

 

 

XAUTH fail! My name:

%s is the my xauth name. This indicates that my name is invalid.

 

 

%s

 

 

 

XAUTH fail! Remote

%s is the remote xauth name. This indicates that a remote user’s

 

 

user: %s

name is invalid.

 

 

XAUTH succeed! My

%s is the my xauth name. This indicates that my name is valid.

 

 

name: %s

 

 

 

XAUTH succeed! Remote

%s is the remote xauth name. This indicate that a remote user’s name

 

 

user: %s

is valid

 

 

Dynamic Tunnel

The variables represent the phase 1 name, tunnel name, SPI and the

 

 

[%s:%s:0x%x:%s] built

xauth name (optional). The phase-2 tunnel negotiation is complete.

 

 

successfully

 

 

 

Dynamic Tunnel

The variables represent the phase 1 name, tunnel name, old SPI, new

 

 

[%s:%s:0x%x:0x%x:%s]

SPI and the xauth name (optional). The tunnel was rekeyed

 

 

rekeyed successfully

successfully.

 

 

Tunnel

The variables represent the phase 1 name, tunnel name, SPI and the

 

 

[%s:%s:0x%x:%s] built

xauth name (optional). The phase-2 tunnel negotiation is complete.

 

 

successfully

 

 

 

Tunnel

The variables represent the phase 1 name, tunnel name, old SPI, new

 

 

[%s:%s:0x%x:0x%x:%s]

SPI and the xauth name (optional). The tunnel was rekeyed

 

 

rekeyed successfully

successfully.

 

 

Tunnel [%s:%s] Phase

The variables represent the phase 1 name and tunnel name. When

 

 

1 pre-shared key

negotiating phase-1, the pre-shared keys did not match.

 

 

mismatch

 

 

 

Tunnel [%s:%s]

The variables represent the phase 1 name and tunnel name. The

 

 

Recving IKE request

device received an IKE request.

 

 

Tunnel [%s:%s]

The variables represent the phase 1 name and tunnel name. The

 

 

Sending IKE request

device sent an IKE request.

 

 

Tunnel [%s:0x%x] is

The variables represent the tunnel name and the SPI of a tunnel that

 

 

disconnected

was disconnected.

 

 

Tunnel [%s] rekeyed

%s is the tunnel name. The tunnel was rekeyed successfully.

 

 

successfully

 

 

 

785

ZyWALL USG 100/200 Series User’s Guide