ZyXEL Communications 100 Series, 200 Series 6.9.4 How to Deploy the Backup ZyWALL, 6.9.5How to Check Your Device HA Setup

Chapter 6 Tutorials

Figure 121 Device HA > Active-Passive Mode: Backup ZyWALL Example

5Click the General tab. Turn on device HA and click Apply.

Figure 122 Device HA > General: Master ZyWALL Example

6.9.4 How to Deploy the Backup ZyWALL

Connect ZyWALL B’s lan1 interface to the LAN1 network. Connect ZyWALL B’s wan1 interface to the same router that ZyWALL A’s wan1 interface uses for Internet access. ZyWALL B copies A’s configuration (and resychronizes with A every hour). If ZyWALL A fails or loses its lan1 or wan1 connection, ZyWALL B functions as the master.

6.9.5How to Check Your Device HA Setup

1To make sure ZyWALL B copied ZyWALL A’s settings, you can log into ZyWALL B’s management IP address (192.168.1.5) and check the configuration. You can use the

166
	ZyWALL USG 100/200 Series User’s Guide