Appendix A Log Descriptions
Table 301 Interface Logs (continued)
LOG MESSAGE | DESCRIPTION |
"Incorrect PIN code of | The listed cellular interface (%d) does has the wrong PIN code |
interface cellular%d. | configured. |
Please check the PIN |
|
code setting. |
|
"Unable to query the | The ZyWALL could not check the signal strength for the listed cellular |
signal quality from | interface (%d). This could be due to an error or being out of range of |
the device in %s. | the ISP’s cellular station. |
Please try to remove |
|
then insert the |
|
device. |
|
"Interface cellular%d | The listed cellular interface (%d) cannot connect to the ISP. This could |
cannot connect to the | be due to an error or being out of range of the ISP’s cellular station. |
service provider. |
|
"Interface cellular%d | The listed cellular interface (%d) does not have the correct APN |
is configured with | (Access Point Name) configured. |
incorrect APN. |
|
"Interface cellular%d | The listed cellular interface (%d) does not have the correct phone |
is configured with | number configured. |
incorrect phone |
|
number. |
|
"Interface cellular%d | The listed cellular interface (%d) does not have the correct user name |
is configured with | and password configured. |
incorrect username or |
|
password. |
|
"Interface cellular%d | The listed cellular interface (%d) is configured for a particular cellular |
is configured with | device (first %s), but a different cellular device (second %s) is inserted. |
device %s, but current |
|
inserted device is %s. |
|
"Cellular device [%s | The cellular device (identified by its manufacturer and model) has been |
%s] has been inserted | inserted in or connected to the specified slot. |
into %s. |
|
"Cellular device [%s | The cellular device (identified by its manufacturer and model) has been |
%s] has been removed | removed from the specified slot. |
from %s. |
|
Table 302 WLAN Logs
LOG MESSAGE | DESCRIPTION |
Wlan %s is enabled. | The WLAN (IEEE 802.11 b and or g) feature has been turned on. %s |
| is the slot number where the WLAN card is or can be installed. |
Wlan %s is disabled. | The WLAN (IEEE 802.11 b and or g) feature has been turned off. %s |
| is the slot number where the WLAN card is or can be installed. |
Wlan %s has been | The WLAN (IEEE 802.11 b and or g) feature’s configuration has been |
configured. | changed. %s is the slot number where the WLAN card is or can be |
| installed. |
Interface %s has been | The configuration of the specified WLAN interface (%s) has been |
configured. | changed. |
Interface %s has been | The specified WLAN interface (%s) has been removed. |
deleted. |
|
| 809 |
ZyWALL USG 100/200 Series User’s Guide | |
|
|