46

Reports

46.1 Overview

This chapter provides information about the report screens. Use the Report screens to start or stop data collection and view various statistics about traffic passing through your ZyWALL.

"Data collection may decrease the ZyWALL’s traffic throughput rate.

46.1.1What You Can Do in the Report Screens

•Use the Traffic Statistics screen (see Section 46.2 on page 727) to start or stop data collection and view statistics.

•Use the Session screen (see Section 46.3 on page 730) to view sessions by user or service.

•Use the Anti-Virusscreen (see Section 46.4 on page 732) to start or stop data collection and view virus statistics.

•Use the IDP screen (Section 46.5 on page 733) to start or stop data collection and view IDP statistics.

•Use the Anti-Spamscreen (Section 46.6 on page 735) to start or stop data collection and view spam statistics.

•Use the Email Daily Report screen (Section 46.7 on page 737) to configure where and how to send daily reports and what reports to send.

46.2 The Traffic Statistics Screen

Click Maintenance > Report > Traffic Statistics to display the Traffic Statistics screen. This screen provides basic information about the following for example:

•Most-visited Web sites and the number of times each one was visited. This count may not be accurate in some cases because the ZyWALL counts HTTP GET packets. Please see Table 258 on page 728 for more information.

•Most-used protocols or service ports and the amount of traffic on each one

•LAN IP with heaviest traffic and how much traffic has been sent to and from each one

You use the Traffic Statistics screen to tell the ZyWALL when to start and when to stop collecting information for these reports. You cannot schedule data collection; you have to start and stop it manually in the Traffic Statistics screen.

 

727

ZyWALL USG 100/200 Series User’s Guide