Chapter 36 Addresses
Figure 450 Object > Address > Address
The following table describes the labels in this screen. See Section 36.2.1 on page 608 for more information as well.
Table 200 Object > Address > Address
LABEL | DESCRIPTION |
# | This field is a sequential value, and it is not associated with a specific address. |
|
|
Name | This field displays the configured name of each address object. |
|
|
Type | This field displays the type of each address object. “INTERFACE” means the object |
| uses the settings of one of the ZyWALL’s interfaces. |
|
|
Address | This field displays the IP addresses represented by each address object. If the |
| object’s settings are based on one of the ZyWALL’s interfaces, the name of the |
| interface displays first followed by the object’s current address settings. |
|
|
Add icon | This column provides icons to add, edit, and remove addresses. |
| To add an address, click the Add icon at the top of the column. The Address Add/ |
| Edit screen appears. |
| To edit an address, click the Edit icon next to the address. The Address Add/Edit |
| screen appears. |
| To delete an address, click on the Remove icon next to the address. The web |
| configurator confirms that you want to delete the address before doing so. |
|
|
The Address Add/Edit screen allows you to create a new address or edit an existing one. To access this screen, go to the Address screen (see Section 36.2 on page 607), and click either the Add icon or an Edit icon.
Figure 451 Object > Address > Address > Edit
608 |
| |
ZyWALL USG 100/200 Series User’s Guide |
| |
|
|
|