ZyXEL Communications 100 Series, 200 Series 6.5.3How to Set Up User Authentication Using the RADIUS Server

Chapter 6 Tutorials

2Enter the name of the group that is used in Table 31 on page 148. In this example, it is “Finance”. Then, select User/Leo and click the right arrow to move him to the Member list. This example only has one member in this group, so click OK. Of course you could add more members later.

Figure 85 Object > User/Group > Group > Add

3Repeat this process to set up the remaining user groups.

6.5.3How to Set Up User Authentication Using the RADIUS Server

This step sets up user authentication using the RADIUS server. First, configure the settings for the RADIUS server. Then, set up the authentication method, and configure the ZyWALL to use the authentication method. Finally, force users to log in to the ZyWALL before it routes traffic for them.

1Click Object > AAA Server > RADIUS > Default. Configure the RADIUS server, and click Apply.

Figure 86 Object > AAA Server > RADIUS > Default

2Click Object > Auth. method. Click the Add icon.

3Give the new authentication method object a descriptive name, and click the Add icon. Select group radius because the ZyWALL should use the specified RADIUS server for authentication. Click OK.

	149
ZyWALL USG 100/200 Series User’s Guide