ZyXEL Communications 100 Series, 200 Series manual 787

	Appendix A Log Descriptions
Table 291 Firewall Logs (continued)
LOG MESSAGE	DESCRIPTION
Firewall rule %d has	1st %d is the old global index of rule, 2nd %d is the new global index of
been moved to %d.	rule
Firewall rule %d has	%d is the global index of rule
been deleted.
Firewall rules have	Firewall rules were flushed
been flushed.
Firewall rule %d was	%d is the global index of rule, %s is appended/inserted/modified
%s.
Firewall %s %s rule %d	1st %s is from zone, 2nd %s is to zone, %d is the index of the rule
was %s.	3rd %s is appended/inserted/modified
Firewall %s %s rule %d	1st %s is from zone, 2nd %s is to zone, 1st %d is the old index of the
has been moved to %d.	rule
	2nd %d is the new index of the rule
Firewall %s %s rule %d	1st %s is from zone, 2nd %s is to zone, %d is the index of the rule
has been deleted.
Firewall %s %s rules	1st %s is from zone, 2nd %s is to zone
have been flushed.
abnormal TCP flag	Abnormal TCP flag attack detected
attack detected
invalid state detected	Invalid state detected
The Asymmetrical Route	Asymmetrical route has been turned on.
has been enabled.
The Asymmetrical Route	Asymmetrical Route has been turned off.
has been disabled.
Table 292 Sessions Limit Logs
LOG MESSAGE	DESCRIPTION
Maximum sessions per	%d is maximum sessions per host.
host (%d) was
exceeded.

Table 293 Policy Route Logs

LOG MESSAGE	DESCRIPTION
Can't open bwm_entries	Policy routing can't activate BWM feature.
Can't open link_down	Policy routing can't detect link up/down status.
Cannot get handle from	User-aware policy routing is disabled due to some reason.
UAM, user-aware PR is
disabled
mblock: allocate	Allocating policy routing rule fails: insufficient memory.
memory failed!
pt: allocate memory	Allocating policy routing rule fails: insufficient memory.
failed!

	787
ZyWALL USG 100/200 Series User’s Guide