Appendix A Log Descriptions
Table 282 ZySH Logs (continued)
LOG MESSAGE | DESCRIPTION |
can't get name for | 1st:zysh entry index |
entry %d! |
|
can't get reference | 1st:zysh list name |
count: %s! |
|
can't print entry name: | 1st:zysh entry name |
%s! |
|
Can't append entry: %s! | 1st:zysh entry name |
Can't set entry: %s! | 1st:zysh entry name |
Can't define entry: %s! | 1st:zysh entry name |
%s: list is full! | 1st:zysh list name |
Can't undefine %s | 1st:zysh list name |
Can't remove %s | 1st:zysh list name |
Table OPS |
|
%s: cannot retrieve | 1st:zysh table name |
entries from table! |
|
%s: index is out of | 1st:zysh table name |
range! |
|
%s: cannot set entry | 1st:zysh table name,2st: zysh entry num |
#%d |
|
%s: table is full! | 1st:zysh table name |
%s: invalid old/new | 1st:zysh table name |
index! |
|
Unable to move entry | 1st:zysh entry num |
#%d! |
|
%s: invalid index! | 1st:zysh table name |
Unable to delete entry | 1st:zysh entry num |
#%d! |
|
Unable to change entry | 1st:zysh entry num |
#%d! |
|
%s: cannot retrieve | 1st:zysh table name |
entries from table! |
|
%s: invalid old/new | 1st:zysh table name |
index! |
|
Unable to move entry | 1st:zysh entry num |
#%d! |
|
%s: apply failed at | 1st:zysh table name |
initial stage! |
|
%s: apply failed at | 1st:zysh table name |
main stage! |
|
%s: apply failed at | 1st:zysh table name |
closing stage! |
|
| 767 |
ZyWALL USG 100/200 Series User’s Guide | |
|
|