ZyXEL Communications 100 Series, 200 Series 6.3.3 How to Set Up the Wireless Clients to Use the WLAN Interface

Chapter 6 Tutorials

6.3.3 How to Set Up the Wireless Clients to Use the WLAN Interface

The following sections show you how to have a wireless client (not included with the ZyWALL) use the wireless network.

6.3.3.1 How to Configure the ZyXEL Wireless Client Utility

This example shows how to configure ZyXEL’s wireless client utility (not included with the ZyWALL) to use the WLAN interface. See Section 6.3.3.2 on page 137 instead for how to use Funk Odyssey’s wireless client software if you want the wireless client to validate the ZyWALL’s certificate (for added protection against connecting to a rogue AP).

1Open the wireless client utility and click Profile.

Figure 57 ZyXEL Wireless Client

2Add a new profile. This example uses “ZYXEL_WPA” as the name. It is also the SSID (name) of the wireless network. Select Infrastructure and click Next.

134
	ZyWALL USG 100/200 Series User’s Guide