ZyXEL Communications 100 Series, 200 Series Status, 7.1 Overview, 7.2The Status Screen, 7.1.1 What You Can Do in the Status Screens

7

Status

7.1 Overview

Use the Status screens to check status information about the ZyWALL.

7.1.1 What You Can Do in the Status Screens

Use the Status screens for the following.

•Use the main Status screen (see Section 7.2 on page 171) to see the ZyWALL’s general device information, system status, system resource usage, licensed service status, and interface status. You can also go to the other status screens for more information.

•Use the VPN status screen (see Section 7.2.4 on page 178) to look at the VPN tunnels that are currently established.

•Use the DHCP Table screen (see Section 7.2.5 on page 179) to look at the IP addresses currently assigned to DHCP clients and the IP addresses reserved for specific MAC addresses.

•Use the Port Statistics screen (see Section 7.2.6 on page 180) to look at packet statistics for each physical port. To access this screen, click Port Statistics in the Status screen.

•Use the Port Statistics Graph screen (see Section 7.2.6 on page 180) to look at a line graph of packet statistics for each physical port.

•Use the Current Users screen (see Section 7.2.8 on page 182) to look at a list of the users currently logged into the ZyWALL.

7.2The Status Screen

The Status screen displays when you log into the ZyWALL or click Status. Use this screen to look at the ZyWALL’s general device information, system status, system resource usage, licensed service status, and interface status.

	171
ZyWALL USG 100/200 Series User’s Guide