Chapter 27 Application Patrol

Table 141 AppPatrol > Other (continued)

LABEL

DESCRIPTION

BWM

These fields show the amount of bandwidth the traffic can use. These fields only

 

apply when Access is set to forward.

 

In - This is how much inbound bandwidth, in kilobits per second, this policy allows

 

the matching traffic to use. Inbound refers to the traffic the ZyWALL sends to a

 

connection’s initiator. If no displays here, this policy does not apply bandwidth

 

management for the inbound traffic.

 

Out - This is how much outgoing bandwidth, in kilobits per second, this policy

 

allows the matching traffic to use. Outbound refers to the traffic the ZyWALL sends

 

out from a connection’s initiator. If no displays here, this policy does not apply

 

bandwidth management for the outbound traffic.

 

Pri - This is the priority for the traffic that matches this policy. The smaller the

 

number, the higher the priority. Traffic with a higher priority is given bandwidth

 

before traffic with a lower priority. The ZyWALL ignores this number if the incoming

 

and outgoing limits are both set to 0. In this case the traffic is automatically treated

 

as being set to the lowest priority (7) regardless of this field’s configuration.

 

 

Log

Select whether to have the ZyWALL generate a log (log), log and alert (log alert)

 

or neither (no) when traffic matches this policy. See Chapter 45 on page 715 for

 

more on logs.

 

 

Add icon

Click the Add icon in the heading row to add a new first entry.

 

The Active icon displays whether the entry is enabled or not. Click the Active icon

 

to activate or deactivate the entry. Make sure you click Apply to save and apply the

 

change.

 

Click the Edit icon to go to the screen where you can edit the entry.

 

Click the Add icon in an entry to add a new entry below the current entry.

 

Click the Remove icon to delete an existing entry from the ZyWALL. A window

 

displays asking you to confirm that you want to delete the entry.

 

To move an entry up or down in the list, click on the Move to N icon next to the

 

entry, and type the line number (# field) of where you want to move the entry. The #

 

field is updated accordingly. The ordering of the entries is important as they are

 

applied in order of their numbering.

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

27.4.1 The Other Applications Add/Edit Screen

The Other Configuration Add/Edit screen allows you to create a new condition or edit an existing one. To access this screen, go to the Other Protocol screen (see Section 27.4 on page 458), and click either the Add icon or an Edit icon.

460

 

ZyWALL USG 100/200 Series User’s Guide