Chapter 10 Interface

Figure 158 Interface Wizard: Summary WAN (PPTP Shown)

The following table describes the labels in this screen.

Table 58 Interface Wizard: Summary WAN

LABEL

DESCRIPTION

Encapsulation

This displays what encapsulation this interface uses to connect to the Internet.

 

 

Base Interface

This field only appears for a PPTP interface. It displays the identity of the Ethernet

 

interface for connecting with a modem or router.

 

 

Base IP Address

This field only appears for a PPTP interface. It displays the (static) IP address

 

assigned to you by your ISP.

 

 

IP Subnet Mask

This field only appears for a PPTP interface. It displays the subnet mask assigned

 

to you by your ISP (if you entered one).

 

 

Server IP

This field only appears for a PPTP interface. It displays the IP address of the PPTP

 

server.

 

 

User Name

Type the user name given to you by your ISP. You can use alphanumeric and -

 

_@$./ characters, and it can be up to 31 characters long.

Nailed-Up

Select Nailed-Upif you do not want the connection to time out.

 

 

Idle Timeout

Type the time in seconds that elapses before the router automatically disconnects

 

from the PPPoE server. 0 means no timeout.

 

 

WAN Interface

This displays the identity of the interface you configure to connect with your ISP.

 

 

Zone

This field displays to which security zone this interface and Internet connection will

 

belong.

 

 

IP Address

This field displays whether the WAN IP address is static or dynamic (Auto).

Assignment

 

 

 

First DNS Server

If the IP Address Assignment is Static, these fields display the DNS server IP

Second DNS

address(es).

Server

 

 

 

Add this interface

This shows whether or not the interface is part of the default WAN trunk for load

to WAN_TRUNK

balancing.

for WAN load

 

balance.

 

 

 

OK

Click OK to close the screen.

 

 

220

 

ZyWALL USG 100/200 Series User’s Guide