ZyXEL Communications 100 Series, 200 Series 10.12.2 Configuring the VLAN Add/Edit Screen

Chapter 10 Interface

Table 74 Network > Interface > VLAN (continued)

LABEL	DESCRIPTION
Add icon	This column lets you create, edit, remove, activate, and deactivate interfaces.
	To create a VLAN interface, click the Add icon at the top of the column. The
	VLAN Add/Edit screen appears.
	To create a virtual VLAN interface, click the Add icon next to the corresponding
	VLAN interface. The Virtual Interface Add/Edit screen appears. See Section
	10.15 on page 263.
	To edit an interface, click the Edit icon next to it. The VLAN Add/Edit screen or
	Virtual Interface Add/Edit screen appears accordingly.
	To remove an interface, click the Remove icon next to it. The ZyWALL confirms
	you want to remove it before doing so.
	To activate or deactivate an interface, click the Active icon next to it. Make sure
	you click Apply to save and apply the change.
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to begin configuring this screen afresh.

10.12.2 Configuring the VLAN Add/Edit Screen

This screen lets you configure IP address assignment, interface bandwidth parameters, DHCP settings, and ping check for each VLAN interface. To access this screen, click the Add icon at the top of the Add column or click an Edit icon next to a VLAN interface in the VLAN Summary screen. The following screen appears.

250
	ZyWALL USG 100/200 Series User’s Guide