Chapter 27 Application Patrol
"You must register for the IDP/AppPatrol signature service (at least the trial) before you can use it.
See Chapter 8 on page 185 for how to register.
Click AppPatrol to open the following screen.
Figure 362 AppPatrol > General
The following table describes the labels in this screen. See Section 27.3.1 on page 454 for more information as well.
Table 137 AppPatrol > General
LABEL | DESCRIPTION | |
Enable | Select this check box to turn on application patrol. | |
Application |
| |
Patrol |
| |
|
| |
Enable BWM | This is a global setting for enabling or disabling bandwidth management on the | |
| ZyWALL. You must enable this setting to have individual policy routes or | |
| application patrol policies apply bandwidth management. | |
| This same setting also appears in the Network > Routing > Policy Route screen. | |
| Enabling or disabling it in one screen also enables or disables it in the other screen. | |
|
| |
Enable | Select this to maximize the throughput of SIP traffic to improve | |
Highest | sound quality. This has the ZyWALL immediately send SIP traffic upon identifying | |
Bandwidth | it. The ZyWALL ignores any other application patrol rules for SIP traffic (so there is | |
Priority for | no bandwidth control for SIP traffic). When this option is enabled the ZyWALL also | |
SIP Traffic | ||
does not record SIP traffic bandwidth usage statistics. | ||
| ||
|
| |
Registration | The following fields display information about the current state of your subscription | |
| for IDP/application patrol signatures. | |
|
| |
Registration | This field displays whether a service is activated (Licensed) or not (Not Licensed) | |
Status | or expired (Expired). | |
|
| |
Registration | This field displays whether you applied for a trial application (Trial) or registered a | |
Type | service with your iCard’s PIN number (Standard). None displays when the service | |
| is not activated. | |
|
|
452 |
| |
ZyWALL USG 100/200 Series User’s Guide |
| |
|
|
|