Chapter 36 Addresses

The following table describes the labels in this screen.

Table 201 Object > Address > Address > Edit

LABEL

DESCRIPTION

Name

Type the name used to refer to the address. You may use 1-31 alphanumeric

 

characters, underscores(_), or dashes (-), but the first character cannot be a

 

number. This value is case-sensitive.

Address Type

Select the type of address you want to create. Choices are: HOST, RANGE,

 

SUBNET, INTERFACE IP, INTERFACE SUBNET, and INTERFACE GATEWAY.

 

Note: The ZyWALL automatically updates address objects that are

 

based on an interface’s IP address, subnet, or gateway if the

 

interface’s IP address settings change. For example, if you

 

change LAN1’s IP address, the ZyWALL automatically

 

updates the corresponding interface-based, LAN1 subnet

 

address object.

 

 

IP Address

This field is only available if the Address Type is HOST. This field cannot be blank.

 

Enter the IP address that this address object represents.

 

 

Starting IP

This field is only available if the Address Type is RANGE. This field cannot be

Address

blank. Enter the beginning of the range of IP addresses that this address object

 

represents.

 

 

Ending IP

This field is only available if the Address Type is RANGE. This field cannot be

Address

blank. Enter the end of the range of IP address that this address object represents.

 

 

Network

This field is only available if the Address Type is SUBNET, in which case this field

 

cannot be blank. Enter the IP address of the network that this address object

 

represents.

 

 

Netmask

This field is only available if the Address Type is SUBNET, in which case this field

 

cannot be blank. Enter the subnet mask of the network that this address object

 

represents. Use dotted decimal format.

 

 

Interface

If you selected INTERFACE IP, INTERFACE SUBNET, or INTERFACE

 

GATEWAY as the Address Type, use this field to select the interface of the

 

network that this address object represents.

 

 

OK

Click OK to save your changes back to the ZyWALL.

 

 

Cancel

Click Cancel to exit this screen without saving your changes.

 

 

36.3 Address Group Summary Screen

The Address Group screen provides a summary of all address groups. To access this screen, click Object > Address > Address Group.

Figure 452 Object > Address > Address Group

 

609

ZyWALL USG 100/200 Series User’s Guide