Chapter 26 L2TP VPN Example

26.4 Configuring the L2TP VPN Settings Example

1 Click VPN > L2TP VPN to open the following screen.

Figure 304 VPN > L2TP VPN Example

2Configure the following.

•Enable the connection.

•Set it to use the Default_L2TP_VPN_Connection VPN connection.

•Configure an IP address pool for the range of 192.168.10.10 to 192.168.10.20. It is called L2TP_POOL here.

•This example uses the default authentication method (the ZyWALL’s local user data base).

•Select a user or group of users that can use the tunnel. Here a user account named L2TP-testhas been created.

•The other fields are left to the defaults in this example, click Apply.

26.5Configuring the Policy Route for L2TP Example

1Click Routing > Add to open the following screen.

418

 

ZyWALL USG 100/200 Series User’s Guide