Appendix A Log Descriptions

Table 301 Interface Logs (continued)

LOG MESSAGE

DESCRIPTION

AUX Interface

The AUX interface is not enabled and a user tried to use the

disconnecting failed.

disconnect aux command.

This AUX interface is

 

not enabled.

 

Please type phone

A user tried to dial the AUX interface, but the AUX interface does not

number of interface

have a phone number set.

AUX first then dial

 

again.

 

Please type phone

The AUX interface does not have a phone number set and a user tried

number of Interface

to use the disconnect aux command.

AUX first then

 

disconnect again.

 

Interface %s will

Device-ha became active and is using a PPP base interface, the PPP

reapply because Device

interface must reapply, %s is the interface name.

HA become active

 

status.

 

Interface %s will

Device-ha was deleted and free PPP base interface, PPP interface

reapply because Device

must reapply, %s is the interface name.

HA is not running.

 

Interface %s will stop

When device-ha is stand-by and use PPP base interface, PPP

connect because Device

interface connection will stop, %s: interface name.

HA become standby

 

status.

 

Create interface %s

When PPP can't running fail, %s: interface name.

has been failed.

 

Base interface %s is

When user disable ethernet, vlan or bridge interface and this interface

disabled. Interface %s

is base interface of PPP or virtual interface. PPP and virtual will disable

is disabled now.

too. 1st %s is interface name, 2nd %s is interface.

Interface %s has been

An administrator changed an interface’s configuration. %s: interface

changed.

name.

Interface %s has been

An administrator added a new interface. %s: interface name.

added.

 

Interface %s is

An administrator enabled an interface. %s: interface name.

enabled.

 

Interface %s is

An administrator disabled an interface. %s: interface name.

disabled.

 

%s MTU > (%s MTU - 8),

An administrator configured a PPP interface, PPP interface MTU >

%s may not work

(base interface MTU - 8), PPP interface may not run correctly because

correctly.

PPP packets will be fragmented by base interface and the peer will not

 

receive correct PPP packets. 1st %s: PPP interface name, 2nd %s:

 

ethernet interface name.

 

 

(%s MTU - 8) < %s MTU,

An administrator configured ethernet, vlan or bridge and this interface

%s may not work

is base interface of PPP interface. PPP interface MTU > (base

correctly.

interface MTU - 8), PPP interface may not run correctly because PPP

 

packets will be fragmented by base interface and peer will not receive

 

correct PPP packets.1st %s: Ethernet interface name, 2nd %s: PPP

 

interface name.

 

 

806

 

ZyWALL USG 100/200 Series User’s Guide