ZyXEL Communications 100 Series, 200 Series 4.4 Device Registration

Chapter 4 Wizard Setup

4.4 Device Registration

Use this screen to register your ZyWALL with myZXEL.com and activate trial periods of subscription security features if you have not already done so.

"You must be connected to the Internet to register.

This screen displays a read-only user name and password if the ZyWALL is already registered. It also shows which trial services are activated (if any). You can still select the unchecked trial service(s) to activate it after registration. Use the Registration > Service screen to update your service subscription status.

Figure 29 Registration

The following table describes the labels in this screen.

Table 13 Registration

LABEL	DESCRIPTION
Device Registration	If you select existing myZyXEL.com account, only the User Name and
	Password fields are available.
new myZyXEL.com	If you haven’t created an account at myZyXEL.com, select this option and
account	configure the following fields to create an account and register your
	ZyWALL.
existing myZyXEL.com	If you already have an account at myZyXEL.com, select this option and enter
account	your user name and password in the fields below to register your ZyWALL.
UserName	Enter a user name for your myZyXEL.com account. The name should be
	from six to 20 alphanumeric characters (and the underscore). Spaces are
	not allowed.
Check	Click this button to check with the myZyXEL.com database to verify the user
	name you entered has not been used.

	91
ZyWALL USG 100/200 Series User’s Guide