Appendix A Log Descriptions
Table 302 WLAN Logs (continued)
LOG MESSAGE | DESCRIPTION |
Create interface %s | The wireless device failed to create the specified WLAN interface |
has failed. Wlan | (%s). Remove the wireless device and reinstall it. |
device does not exist. |
|
System internal error. | IEEE 802.1x or WPA is not enabled. |
No 802.1X or WPA |
|
enabled! |
|
System internal error. | The ZyWALL was not able to configure the wireless device to use |
Error configuring WPA | WPA. Remove the wireless device and reinstall it. |
state! |
|
System internal error. | The ZyWALL was not able to enable WPA/IEEE 802.1X. |
Error enabling WPA/ |
|
802.1X! |
|
Station has | A wireless client with the specified MAC address (second %s) |
associated. Interface: | associated with the specified WLAN interface (first %s). |
%s, MAC: %s. |
|
WPA or WPA2 enterprise | There was an EAP timeout for a wireless client connected to the |
EAP timeout. | specified WLAN interface (first %s). The MAC address of the wireless |
Interface: %s, MAC: | client is listed (second %s). |
%s. |
|
Station association | A wireless client with the specified MAC address (second %s) failed to |
has failed. Maximum | connect to the specified WLAN interface (first %s) because the WLAN |
associations have | interface already has its maximum number of wireless clients. |
reached the maximum |
|
number. Interface: %s, |
|
MAC: %s. |
|
WPA authentication has | A wireless client used an incorrect WPA key and thus failed to connect |
failed. Interface: %s, | to the specified WLAN interface (first %s). The MAC address of the |
MAC: %s. | wireless client is listed (second %s). |
Incorrect password for | A wireless client used an incorrect WPA or WPA2 user password and |
WPA or WPA2 enterprise | failed authentication by the ZyWALL’s local user database while trying |
internal | to connect to the specified WLAN interface (first %s). The MAC |
authentication. | address of the wireless client is listed (second %s). |
Interface: %s, MAC: |
|
%s. |
|
Incorrect username or | A wireless client used an incorrect WPA or WPA2 user name or user |
password for WPA or | password and failed authentication by the ZyWALL’s local user |
WPA2 enterprise | database while trying to connect to the specified WLAN interface (first |
internal | %s). The MAC address of the wireless client is listed (second %s). |
authentication. |
|
Interface: %s, MAC: |
|
%s. |
|
System internal error. | There was an error when attempting to extract the |
%s: STA %s could not | a RADIUS message. The first %s is the WLAN interface. The second |
extract | %s is the MAC address of the wireless client. |
from RADIUS message |
|
810 |
| |
ZyWALL USG 100/200 Series User’s Guide |
| |
|
|
|