ZyXEL Communications 100 Series, 200 Series 10.2The Interface Status Screen

Chapter 10 Interface

Table 47 Relationships Between Different Types of Interfaces (continued)

INTERFACE	REQUIRED PORT / INTERFACE
PPPoE/PPTP interface	WAN1, WAN2, OPT*

virtual interface
(virtual Ethernet interface)	Ethernet interface*
(virtual VLAN interface)	VLAN interface*
(virtual bridge interface)	bridge interface

trunk	Ethernet interface
	Cellular interface
	VLAN interface
	bridge interface
	PPPoE/PPTP interface
	auxiliary interface

*- You cannot set up a PPPoE/PPTP interface, virtual Ethernet interface or virtual VLAN interface if the underlying interface is a member of a bridge. You also cannot add an Ethernet interface or VLAN interface to a bridge if the member interface has a virtual interface or PPPoE/PPTP interface on top of it.

Finding Out More

•See Section 5.2 on page 110 details on the differences between physical ports, interfaces, and zones in the ZyWALL.

•See Section 5.4.2 on page 114 for related information about the Interface screens.

•See Section 10.16 on page 265 for background information on interfaces.

•See Section 6.1 on page 125 for an example of configuring Ethernet interfaces and port roles.

•See Section 6.2 on page 129 for an example of configuring a cellular (3G) interface.

•See Section 6.3 on page 131 for an example of configuring a WLAN interface.

•See Chapter 11 on page 269 to configure load balancing using trunks.

10.2The Interface Status Screen

This screen lists all of the ZyWALL’s interfaces and gives packet statistics for them. Click Network > Interface to access this screen.

202
202	ZyWALL USG 100/200 Series User’s Guide