100 Chapter 2
One-Button Measurement Functions
Meas Setup (Adjacent Channel Power—ACP)
One-Button Measurement Functions
Key Type: 1 of N menu
Key Path: Meas Setup, Method
History: Added with PSA firmware revision A.06.00
Remote Command:
Use[:SENSe]:ACPower:METHod See “Method” on page 97.
Example: ACP:METH FAST
The following is an example of how to optimize speed.
FORM:DATA REAL,32
CAL:AUTO OFF
CONF:ACP
RAD:STAN W3GPP
SWE:POIN 601
ACP:AVER OFF
ACP:CARR:AUTO ON
ACP:FILT ON
ACP:FILT:ALPH 0.22
ACP:CORR:NOISE OFF
POW:RANG:AUTO ONCE
ACP:METH FAST
INIT:CONT OFF
DISP:ENAB OFF
INIT:ACP
2.3.8 Total Pwr Ref Enables you to set the adjacent channel power reference to automatic or manual when
Meas Type is set to Total Pwr R ef. When set to automatic, the carrier power result reflects
the measured power value in the carrier. When set to manual, the last measured value is
captured and held, or may be entered by the user. Relative values are displayed,
referenced to the total power measured in the main channel.
Key Path: Meas Setup
Span Zoom Not Applicable
Full Span Not Applicable
Zero Span Not Applicable
Last Span Not Applicable
Signal Track Not Applicable
a. This function is not disabled when Fast is selected.
b. The maximum sweep time available is limited to 27 ms.
Function Value