84 Chapter 2
One-Button Measurement Functions
MEASURE (Spectrum Analysis Mode)
One-Button Measurement Functions
n=2 Returns the displayed frequency domain spectrum trace data
separated by comma. The number of data points is determined by
the setting of the trace points parameter.
n=3 Returns the displayed frequency domain absolute limit trace data
separated by comma. The number of data points is determined by
the setting of the trace points parameter.
n=4 Returns the displayed frequency domain relative limit trace data
separated by comma. The number of data points is determined by
the setting of the trace points parameter.
Using Total Power
Reference n=5 Total Power Reference
Returns 12 comma-separated scalar values (in dBm) of the
absolute power of the segment frequencies (14 when offset F is
active):
1. Total power reference (dBm)
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
…
11.Negative offset frequency (E)
12.Positive offset frequency (E)
If offset F is active:
13.Negative offset frequency (F)
14.Positive offset frequency (F)
Using Power
Spectral Density
Reference
n=5 Power Spectral Density Reference
Returns 12 comma-separated scalar values (in dBm/Hz) of the
absolute power of the segment frequencies (14 when offset F is
active):
1. Total power reference (dBm/Hz)
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
…
11.Negative offset frequency (E)
12.Positive offset frequency (E)
If offset F is active:
13.Negative offset frequency (F)
14.Positive offset frequency (F)
Measurement Results Available (Continued)
Command /
Condition n Results Returned