Chapter 2 101
One-Button Measurement Functions
Meas Setup (Adjacent Channel Power—ACP)
One-Button Measurement Functions
State Saved: Saved in instrument state.
Factory Preset: Auto, Measured carrier power value
Ter mina tors : dB m
Default Terminator: dBm
Range: –200 dBm to 200 dBm
History: Added with PSA firmware revision A.02.00.
Added with ESA firmware revision A.07.00.
Remote Command:
[:SENSe]:ACPower:CARRier[:POWer]
[:SENSe]:ACPower:CARRier:AUTO[:STATe] OFF|ON|0|1
[:SENSe]:ACPower:CARRier:AUTO[:STATe]?
ESA Only: [:SENSe]:ACPower:CARRier[:POWer] <ampl>
ESA Only: [:SENSe]:ACPower:CARRier[:POWer]?
Example: ACP:CARR:AUTO 0
ACP:CARR:AUTO?
ESA Only: ACP:CARR -100
ESA Only: ACP:CARR?
2.3.9 PSD Ref
Enables you to set the power spectral density in the carrier (main channel) that will be
used to compute the relative power spectral density values for the offsets when Meas Type
is set to PSD Ref. When the PSD Ref state is set to Auto, this will be set to the measured
carrier power spectral density.
Factory Preset: 0 dBm
Ter mina tors : dB m
Default Terminator: dBm
Step Key
Increment: 1, 1.5, 2...
Range: –999 dBm to +999 dBm
History: Added with PSA firmware revision A.02.00.
Added with ESA firmware revision A.07.01.