Chapter 2 45
One-Button Measurement Functions
Mode Setup (Spectrum Analysis Mode)
One-Button Measurement Functions
2.1.1.17.1 System E PSA Only: Sets the specific parameters for the selected
measurement (located under the “MEASURE (Spectrum Analysis Mode)” key description)
appropriate for industry standard System E. This standard is only available for the
Channel Power, Occupied BW, or ACP measurements.
Key Type: 1 of N menu
Key Path: Mode Setup, Radio Std
History: Added with PSA firmware revision A.06.00
Remote Command:
Use[:SENSe]:RADio:STANdard[:SELect] See “Radio Std” on page33.
Example: RAD:STAN DVBTGPN
2.1.1.18 UWB
Accesses the UWB radio standards key menu to enable you to select a UWB standard.
Selecting a radio standard modifies spectrum analyzer settings for the Spurious Emissions
measurement activated under the MEASURE menu.
Key Type: 1 of N menu
Key Path: Mode Setup, Radio Std
History: Added with PSA firmware revision A.06.00
2.1.1.18.1 UWB Indoor Sets the specific parameters for the selected measurement
(located under the “MEASURE (Spectrum Analysis Mode)” key description) appropriate
for UWB Indoor standard. This standard is only available for the Spurious Emissions
measurement.
Key Type: 1 of N menu
Key Path: Mode Setup, Radio Std
History: Added with PSA firmware revision A.06.00
Remote Command:
Use[:SENSe]:RADio:STANdard[:SELect] See “Radio Std” on page33.
Example: RAD:STAN UWBINDOOR