Agilent Technologies E4443A(3HZ-6.7GHZ) 2.11 Meas Setup (Channel PowerCHP)

Chapter 2 133

One-Button Measurement Functions

Meas Setup (Channel Power—CHP)

One-Button Measurement Functions

2.11 Meas Setup (Channel Power—CHP)

When the channel power measurement has been selected in the Measure key menu of the

Spectrum Analysis Mode, this key displays the appropriate measurement setup menu.

The Channel Power measurement measures the power and power spectral density in the

channel bandwidth that you specify. One marker pair on the display indicates the edges of

the channel bandwidth. The center frequency, reference level, and channel bandwidth

must be set by the user.

Key Path: Front-panel key

Dependencies/

Couplings: Menu changes depending on the Mode and Measurement selected.

State Saved: No save

History: Added with PSA firmware revision A.02.00

Remote Command:

There is no equivalent remote command.

To specify the number of measurement averages used when calculating the measurement

result set Avg Num ber to On. The average will be displayed at the end of each sweep.

Setting Avg Numb er to Off disables measurement averaging.

Key Path: Meas Setup

State Saved: Saved in instrument state.

Factory Preset: 10 averages/ Off

Knob Increment: 1

Step Key

Increment: 1

Range: 1 to 1000

Remote Command:

[:SENSe]:CHPower:AVERage:COUNt <integer>

[:SENSe]:CHPower:AVERage:COUNt?

[:SENSe]:CHPower:AVERage[:STATe] OFF|ON|0|1

[:SENSe]:CHPower:AVERage[:STATe]?