Agilent Technologies E4443A(3HZ-6.7GHZ) 2.13 Meas Setup (Harmonic Distortion)

Chapter 2 141

One-Button Measurement Functions

Meas Setup (Harmonic Distortion)

One-Button Measurement Functions

2.13 Meas Setup (Harmonic Distortion)

When the harmonic distortion measurement has been selected in the Measure key menu of

the Spectrum Analysis Mode, this key displays the appropriate measurement setup menu.

Key Path: Front-Panel key

Dependencies/

Couplings: This measurement is not available when external mixing has been

selected.

Saved State: Not saved.

Press Avg Number (On) to specify the number of measurement averages used when

calculating the measurement result. The average will be displayed at the end of each

sweep.

Key Path: Meas Setup

State Saved: Saved in instrument state.

Factory Preset: 10 averages / Off

Range: 1 to 1000

Remote Command:

[:SENSe]:HARMonics:AVERage:COUNt <integer>

[:SENSe]:HARMonics:AVERage:COUNt?

[:SENSe]:HARMonics:AVERage[:STATe] OFF|ON|0|1

[:SENSe]:HARMonics:AVERage[:STATe]?

Example: HARM:AVER:COUN 100

HARM:AVER ON

Press Avg Mode to select the type of termination control used for the averaging function to

either Exp or Repeat. This determines the averaging action after the specified number of

measurements (average count) is reached.

•EXP (Exponential Averaging mode)—When you set Avg Mode to Exp, each successive

data acquisition after the average count is reached is exponentially weighted and