146 Chapter 2
One-Button Measurement Functions
Meas Setup (Harmonic Distortion)
One-Button Measurement Functions
Example: HARM:RANG:LIST:STAT ON,OFF,ON,ON
2.13.6.2 Center Freq
Used to set the center frequency of the analyzer.
Key Path: Meas Setup, Range Table
Factory Preset: See Table 2-1 on page145.
Knob Increment: 1%
Step Key
Increment: 1, 1.5, 2, 3, 5, 7.5, 10, ...
Range: Frequency range of your analyzer.
History: Added with PSA firmware revision A.03.00
Added with ESA firmware revision A.09.00
Remote Command:
This parameter can send up to 10 values. The location in the list sent corresponds to the
range the value is associated. Missing values are not permitted, for example, if you want to
change values 2 and 6, you must send all values up to 6. Subsequent values will remain as
they were.
[:SENSe]:HARMonics:RANGe[:LIST]:FREQuency <integer>
The query for this parameter will always return 10 values.
[:SENSe]:HARMonics:RANGe[:LIST]:FREQuency?
Example: HARM:RANG:LIST FREQ 300
2.13.6.3 Span
Span is used to set the span of the analyzer.
Key Path: Meas Setup, Range Table
Factory Preset: See Table 2-1 on page145.
Knob Increment: Steps through the available spans.
Step Key
Increment: Steps through the available spans.
Range: Span of your analyzer.
History: Added with PSA firmware revision A.03.00
Added with ESA firmware revision A.09.00