Chapter 2 201
One-Button Measurement Functions
Meas Setup (Spectrum Emissions Mask—SEM)
One-Button Measurement Functions
emission mask measurement results is larger than the limit for Rel Start and Rel Stop.
Key Path: Meas Setup, Offset/Limits, More, Fail Mask
State Saved: Saved in instrument state.
Factory Preset: Dependent upon Radio Standard and device selected, refer to the default
tables for “Offset/Limits” on page 187 for this value.
Remote Command:
Refer to “Fail Mask” on page 199.
2.19.4.11.4 Abs OR Rel
Set the limit test to show Fail if one of the absolute spectrum emission mask measurement
results is larger than the limit for Abs Start and Abs Stop OR one of the relative spectrum
emission mask measurement results is larger than the limit for Rel Start and Rel Stop.
Key Path: Meas Setup, Offset/Limits, More, Fail Mask
State Saved: Saved in instrument state.
Factory Preset: Dependent upon Radio Standard and device selected, refer to the default
tables for “Offset/Limits” on page 187 for this value.
Remote Command:
Refer to “Fail Mask” on page 199.
2.19.5 Results Index
Used to view the sixth result when all offsets are active. Since the display can show only
five results at one time, this key allows you to scroll to the last result.
Key Path: Meas Setup
State Saved: Saved in instrument state.
Factory Preset: 1
Knob Increment: 1
Step Key
Increment: 1
Range: 1 to 6
History: Added with firmware revision A.08.00
Remote Command:
[:SENSe]:SEMask:RESult