Chapter 2 231
One-Button Measurement Functions
Meas Setup (Spurious Emissions)
One-Button Measurement Functions
recalculated for each active range the value is not stored in instrument
state.
Factory Preset: 0.00 dBm
Knob Increment: 1
Step Key
Increment: 10
Range: –180 dBm to 20 dBm, without reference level offset
Remote Command:
[:SENSe]:SPURious:POWer[:RF]:LEVel <integer>
[:SENSe]:SPURious:POWer[:RF]:LEVel?
[:SENSe]:SPURious:POWer[:RF]:RANGe:AUTO OFF|ON|0|1
[:SENSe]:SPURious:POWer[:RF]:RANGe:AUTO?
Example: SPUR:POW:RF:LEV 10
SPUR:POW:RF:RANG:AUTO ON
2.24.7 Fast Spurious Meas Pressing Fast Spurious Meas turns the fast spurious measurement test on or off. Pressing
Fast Spurious Meas to On provides a faster method of execution as with fast spurious
testing spurs above the limit line are reported. Any spurs reported outside the limit will
cause the measurement to fail. See “Abs Start Limit” on page 219 for more information.
Key Path: Meas Setup
Saved State: Ref Level state is saved to instrument state. Ref Level value is
recalculated for each active range the value is not stored in instrument
state.
Factory Preset: Off
Range: Off|On
History: Add with PSA firmware revision A.03.00
Remote Command:
[:SENSe]:SPURious:FSMeas OFF|ON|0|1
[:SENSe]:SPURious:FSMeas?
Example: SPUR:FSM ON