Agilent Technologies E4443A(3HZ-6.7GHZ) 2.1 Mode Setup (Spectrum Analysis Mode)

Chapter 2 33

One-Button Measurement Functions

Mode Setup (Spectrum Analysis Mode)

One-Button Measurement Functions

2.1 Mode Setup (Spectrum Analysis Mode)

Enables you to change measurement settings common to all measurements in the

MEASURE menu. In Spectrum Analysis mode, there are several built-in power

measurements. Parameters that you set in the Mode Setup menu affect all of these

measurements.

Key Path: Front-panel key

Accesses the available radio standard. Selecting a radio standard modifies spectrum

analyzer settings for the measurements activated under the MEASURE menu.

Measurements that are not relevant to the selected radio standard are not available

(grayed out) and they do not have instrument default settings associated with them. If

Enable All Measurements is set to Yes when the Radio Std is pressed, only the standards that

are relavant to the currently active measurement will be available. Unavailable standards

will be grayed out.

Key Path: Mode Setup

Factory Preset: None

History: Updated with PSA firmware revision A.06.00

Updated with PSA firmware revision A.04.00

Added with PSA firmware revision A.02.00

Modified with ESA firmware revision A.08.00

Added with ESA firmware revision A.07.00

Remote Command:

For PSA only:

[:SENSe]:RADio:STANdard[:SELect]

NONE|IS95a|JSTD|IS95C|GSM|W3GPP|C2000MC1|C2000DS|C2000MC3|NADC|PDC|

For ESA only:

[:SENSe]:RADio:STANdard[:SELect]

NONE|IS95a|JSTD|IS95C|GSM|W3GPP|C2000MC1|C2000DS|C2000MC3|NADC|PDC|

DVBTGPN|DVBTIPN|

[:SENSe]:RADio:STANdard[:SELect]?