Chapter 2 145
One-Button Measurement Functions
Meas Setup (Harmonic Distortion)
One-Button Measurement Functions
History: Added with PSA firmware revision A.03.00
Added with ESA firmware revision A.09.00
Remote Command:
There is no equivalent remote command.
2.13.6.1 Range
Selects a range and updates the values on the other Range Table keys so that they reflect
the settings for the selected range. If Range is set to On it is used as part of the
measurement; when set to Off it is excluded. A range is made up of the next parameters.
Key Path: Meas Setup, Range Table
Factory Preset: See Table 2-1 on page145.
Range: Off|On
Remote Command:
This parameter can send up to 10 values. The location in the list sent corresponds to the
range the value is associated with. Missing values are not permitted. For example, if you
want to change values 2 and 6, you must send all values up to 6. Subsequent values
remain as they were.
[:SENSe]:HARMonics:RANGe[:LIST]:STATe OFF|ON|0|1
The query for this parameter will always return 20 values.
[:SENSe]:HARMonics:RANGe[:LIST]:STATe?
Table 2-1 Range Table Default Settings
Range Center
Freq (GHz) Res BW
(kHz)
1 1.000 100.0
2 2.000 200.0
3 3.000 300.0
4 4.000 430.0
5 5.000 510.0
6 6.000 620.0
7 7.000 750.0
8 8.000 820.0
9 9.000 910.0
10 10.00 1000.0