92 Chapter 2
One-Button Measurement Functions
Meas Setup (Adjacent Channel Power—ACP)
One-Button Measurement Functions
MC-3X, and cdma2000 DS is selected.
Key Path: Meas Setup, Offset Setup
State Saved: Saved in instrument state.
Factory Preset: The following table shows the default array if no radio standard (None) is
selected.
Default Terminator: Hz
Knob Increment: Span/50 if non-zero span.
RBW/100 if zero span.
Step Key
Increment: RBW if CF Step is set to Auto with zero span.
Span/10 if CF Step is set to Auto with non-zero span.
CF Step if CF Step is set to Manual.
Range: PSA Only: 0 Hz to 500 MHz
History: Added with PSA firmware revision A.02.00.
Added with ESA firmware revision A.07.00.
Remote Command:
[:SENSe]:ACPower:OFFSet:LIST[:FREQuency]
<f_offset>,<f_offset>,<f_offset>,<f_offset>,<f_offset>,<f_offset>
[:SENSe]:ACPower:OFFSet:LIST[:FREQuency]?
[:SENSe]:ACPower:OFFSet:LIST:STATE
OFF|ON|0|1, OFF|ON|0|1, OFF|ON|0|1, OFF|ON|0|1, OFF|ON|0|1, OFF|ON|0|1
[:SENSe]:ACPower:OFFSet:LIST:STATE?
Remote Command Notes: This command, along with commands
[:SENSe]:ACPower:OFFSet:LIST:BANDwidth|BWIDth[:INTegration]
and [:SENSe]:ACPower:OFFSet:LIST:STATe, are used to set the
parameters for all of the offsets, up to six. The following table shows the
Offset State Frequency Integ. BW
A ON 3 MHz 2 MHz
BOFF0 2 MHz
COFF0 2 MHz
DOFF0 2 MHz
EOFF0 2 MHz
FOFF0 2 MHz