Chapter 2 87
One-Button Measurement Functions
MEASURE (Spectrum Analysis Mode)
One-Button Measurement Functions
Example: FETC:SEM? or MEAS:SEM? or READ:SEM?n=11 Returns 12 comma-separated scalar values (in dBc) of the peak
power relative to the carrier at the segment frequencies (14 when
offset F is active):
1. Reserved for the future use, returns –999.0
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
…
11.Negative offset frequency (E)
12.Positive offset frequency (E)
If offset F is active:
13.Negative offset frequency (F)
14.Positive offset frequency (F)
n=12 Returns the band power result when in WLAN standard. If not in
WLAN standard the value returned will be –999.0
n=13 Returns the number of failed trace points
n=14 Returns the frequency and amplitude delta from the limit of each
failed point
Measurement Results Available (Continued)
Command /
Condition n Results Returned