Chapter 2 217
One-Button Measurement Functions
Meas Setup (Spurious Emissions)
One-Button Measurement Functions
Increment: 1, 1.5, 2, 3, 5, 7.5, 10,...
Range: Frequency range of your analyzer.
Remote Command:
This parameter can receive up to 20 values. The location in the list sent corresponds to the
range the value is associated with. Missing values are not permitted, for example, if you
want to change values 2 and 6, you must send all values up to 6. Subsequent values will
remain as they were.
[:SENSe]:SPURious[:RANGe][:LIST]:FREQuency:STARt <integer>
The query for this parameter will always return 20 values.
[:SENSe]:SPURious[:RANGe][:LIST]:FREQuency:STARt?
2.24.3.3 Stop Freq
Stop Freq is used to set the stop frequency of the analyzer.
Key Path: Meas Setup, Range Table
Factory Preset: See “Range Table” on page 214.
Knob Increment: 1%
Step Key
Increment: 1, 1.5, 2, 3, 5, 7.5, 10,...
Range: Frequency range of your analyzer.
Remote Command:
This parameter can receive up to 20 values. The location in the list sent corresponds to the
range the value is associated with. Missing values are not permitted, for example, if you
want to change values 2 and 6, you must send all values up to 6. Subsequent values will
remain as they were.
[:SENSe]:SPURious[:RANGe][:LIST]:FREQuency:STOP <integer>
The query for this parameter will always return 20 values.
[:SENSe]:SPURious[:RANGe][:LIST]:FREQuency:STOP?
2.24.3.4 Res BW
Res BW is used to set the resolution bandwidth of the analyzer. When Auto is selected the
analyzer determines the optimum setting, while Man enables you to determine the setting.
Key Path: Meas Setup, Range Table
Factory Preset: See “Range Table” on page 214.
Knob Increment: Steps through the available resolution bandwidth filters.