2-18
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter2 Software Installation
Working with the CTC Window
Figure2-7 Adding nodes to a domain
After you add a node to a domain, the span lines leading to nodes within the domain become thicker
(Figure 2-8). The thick lines may represent multiple spans. For example, if the “rio-104” node in
Figure 2-8 is connected to two nodes within domain-0, the thick line represe nts two spans. The thick line
is green if all spans it represents are active and grey if any one span it represents is down. The domain
icon color reflects the highest alarm severity of any node within it.
Figure2-8 Outside nodes displayed within the domain
Within the domain, external nodes and domains that are directly con necte d to no des i nsid e the do ma in
are displayed in a dimmed color (Figure 2-9). DCC links with one or two ends inside the domain are also
displayed.
Figure2-9 Nodes inside a domain
You manage ONS 15454s that reside within a domain the same way you manage ONS 15454 s on t h e
network map. Table 2 -8 shows the domain actions.
Note Domains you create will be seen by all users who log into the network.
55023