6-14
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter6 Circuits and Tunnels
Creating a Path Trace
Figure6-7 Selecting the Edit Path Trace option
Step 5 On the Circuit Path Trace window (Figure6-8) in the New Transmit String field (this field is available
only on DS-1, DS3E, and DS3XM cards), enter the string that you want the source port to transmit. For
example, you could enter the node IP address, node name, c irc uit name , or a noth er st rin g. If the Ne w
Transmit String field is left blank, the J1 transmits an empty string.
Figure6-8 Setting up a path trace
Step 6 Click Apply but do not close the window.
Step 7 Return to the Edit Circuit window (Figure6-7).