Cisco Systems 15454M6DC Slot-0 Status=IpAddress, 172.020.214.107 <Next Done Mod>, Slot-0 Status=Save Cfg., Save and REBOOT? <Apply Revert>

3-5
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter3 Node Setup
Setting Up Network Information
Figure3-2 Selecting the IP address option
Step 3 Press the Status button to display the node IP address (Figure3-3), the node subnet mask length, or
default router IP address.
Figure3-3 Changing the IP address
Step 4 Push the Slot button to move to the IP address or subnet mask digit you need to cha nge. The se lect ed
digit flashes.
Step 5 Press the Port button to cycle the IP address or subnet mask digit to the correct digit.
Step 6 When the change is complete, press the Status button to return to the Node menu.
Step 7 Repeatedly press the Port button until the Save Configuration option appears (Figure 3-4).
Figure3-4 Selecting the Save Configuration option
Step 8 Press the Status button to select the Save Configuration option.
A Save and REBOOT message appears (Figure 3-5).
Figure3-5 Saving and rebooting the TCC+
Step 9 Press the Slot button to save the new IP address configuration. (Or press Po rt to cancel the
configuration.)
FAN FAIL
Slot
Slot-0
Status=IpAddress
44089
CRIT MAJ MIN
Status Port
FAN FAIL
Slot
172.020.214.107
<Next Done Mod>
44090
CRIT MAJ MIN
Status Port
FAN FAIL
Slot
Slot-0
Status=Save Cfg.
44091
CRIT MAJ MIN
Status Port
FAN FAIL
Slot
Save and REBOOT?
<Apply Revert>
44092
CRIT MAJ MIN
Status Port