11-9
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter11 SNMP
SNMP Remote Network Monitoring
typical CTC user, because RMON interoperates with an NMS. However, with CTC you can provision
the RMON alarm thresholds (see the SNMP Remote Network Monitoring section on page11-8). CTC
also monitors the five RMON groups implemented by the ON S 1 545 4.
ONS 15454 RMON implementation is based on the IETF-standard MIB Request for Comment
(RFC)1757. The ONS 15454 implements five groups from the standard MIB: E thernet Statistics, History
Control, Ethernet History, Alarm, and Event.
11.7.1 Ethernet Statistics Group
The Ethernet Statistics group contains the basic statistics for each monitored subnetwork in a single table
named etherstats.
11.7.2 History Control Group
The History Control group defines sampling functions for one or more monitor interfaces. RFC 1757
defines the historyControlTable.
11.7.3 Ethernet History Group
The ONS 15454 implements the etherHistoryTable as defined in RFC 1757, within the bounds of the
historyControlTable.
11.7.4 Alarm Group
The Alarm group consists of a single alarm table. This table provides the networ k perfo rman ce alar m
thresholds for the network management application. With CTC, you can provision the thresholds in the
table.
11.7.5 Event Group
The Event group consists of two tables, eventTable and logT a ble. The even tTable is read-only. The ONS
15454 implements the logTable as specified in RFC 1757.