Procedures
xxx
Cisco ONS 15454 Installation and Operations Guide
November 2001
Provision a DCC Tunnel 6-22
Card Provisioning
Modify Line and Threshold Settings for the DS-1 Card 7-3
Modify Line and Threshold Settings for the DS-3 Card 7-6
Modify Line and Threshold Settings for the DS3E Card 7-9
Modify Line and Threshold Settings for the DS3XM-6 Card 7-12
Modify Line and Threshold Settings for the EC-1 Card 7-14
Provision Line Transmission Settings for OC-N Cards 7-18
Provision Threshold Settings for OC-N Cards 7-19
Provision an OC-N Card for SDH 7-23
Enable Intermediate-Path Performance Monitoring 7-25
Provision External Alarms 7-27
Provision External Controls 7-28
Provision AIC Orderwire 7-29
Convert DS1-14 Cards From 1:1 to 1:N Protection 7-31
Convert DS3-12 Cards From 1:1 to 1:N Protection 7-33
Performance Monitoring
View PMs 8-2
Select Fifteen-Minute PM Intervals on the Performance Monitoring Screen 8-3
Select Twenty-Four Hour PM Intervals on the Performance Monitoring Screen 8-4
Select Near End PMs on the Performance Monitoring Screen 8-5
Select Far End PMs on the Performance Monitoring Screen 8-5
Select Signal-Type Menus on the Performance Monitoring Screen 8-6
Use the Baseline Button on the Performance Monitoring Screen 8-7
Use the Clear Button on the Performance Monitoring Screen 8-8
Enable Pointer Justification Count Performance Monitoring 8-13
Ethernet Operation
Provision Ethernet Ports 9-3
Provision an EtherSwitch Point-to-Point Circuit (Multicard or Single-Card) 9-7
Provision a Shared Packet Ring 9-10
Provision a Hub and Spoke Ethernet Circuit 9-14
Provision a Single-card EtherSwitch Manual Cross-Connect 9-17
Provision a Multicard EtherSwitch Manual Cross-Connect 9-19