1-35
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter1 Hardware Installation
Alarm, Timing, LAN, and Craft Pin Connections
*The Cisco ONS 15454 is DCE.

Procedure: Install LAN Wires on the Backplane

Step 1 Use #22 or #24 AWG wire.
Step 2 Wrap the wires on the appropriate wire-wrap pins according to local site practice.
Step 3 A frame ground pin is located beneath each pin field (FG2 for th e LAN pin field). Wrap the ground shield
of the LAN interface cable to the frame ground pin.
1.9.4 TL1 Craft Interface Installation
You can use the craft pins on the ONS 15454 backplane or the RS-232 port on the T CC+ fa cepl at e t o
create a VT100 emulation window to serve as a TL1 cra ft i nte rf ac e t o t he ON S 15 454 . Us e a
straight-through cable to connect to the RS-232 port. Tab le 1-4 shows the pin assignments for the
CRAFT pin field.
Note You cannot use the craft backplane pins and the RS-232 port on the TCC+ card si multa ne ously.
Table1-3 LAN Pin Assignments
Pin Field Backplane Pins RJ-45 Pins
LAN 1
Connecting to data
circuit-terminating
equipment (DCE*) (a
hub or switch)
B2 1
A2 2
B1 3
A1 6
LAN 1
Connecting to data
terminal equipment
(DTE) (a
PC/workstation or
router)
B1 1
A1 2
B2 3
A2 6
Table1-4 Craft Interface Pin Assignments
Pin Field Contact Function
Craft A1 Receive
A2 Transmit
A3 Ground
A4 DTR