Procedures
xxix
Cisco ONS 15454 Installation and Operations Guide
November 2001
Set Up Internal Timing 3-17
IP Networking
Create a Static Route 4-8
Set up OSPF 4-12
SONET Topologies
Install the BLSR Trunk Cards 5-11
Create the BLSR DCC Terminations 5-13
Enable the BLSR Ports 5-13
Provision the BLSR 5-14
Upgrade From a Two-Fiber to a Four-Fiber BLSR 5-16
Add a BLSR Node 5-18
Remove a BLSR Node 5-21
Move a BLSR Trunk Card 5-24
Install the UPSR Trunk Cards 5-3 0
Configure the UPSR DCC Terminations 5-31
Enable the UPSR Ports 5-32
Switch UPSR Traffic 5-32
Add a UPSR Node 5-34
Remove a UPSR Node 5-35
Subtend a UPSR from a BLSR 5-38
Subtend a BLSR from a UPSR 5-38
Subtend a BLSR from a BLSR 5-40
Create a Linear ADM 5-42
Convert a Linear ADM to UPSR 5-42
Convert a Linear ADM to a BLSR 5-47
Circuits and Tunnels
Create an Automatically Routed Circuit 6-2
Create a Manually Routed Circuit 6-6
Create a Unidirectional Circuit with Multiple Drops 6-8
Create a Monitor Circuit 6-9
Search for ONS 15454 Circuits 6-10
Edit a UPSR Circuit 6-11
Create a J1 Path Trace 6-13