Cisco Systems 15454M6DC Procedure: Apply an Alarm Profile at the Card View, Procedure: Apply an Alarm Profile at the Node View

10-13
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter10 Alarm Monitoring and M anagement
Alarm Profiles
Procedure: Apply an Alarm Profile at the Card View
Step 1 In CTC, display the card view of the desired card.
Step 2 Click the Provisioning > Alarm Behavior tabs.
Step 3 To apply profiles on a port-to-port basis:
a. Click the appropriate row under the Profile column for the port desired.
b. Choose the appropriate Profile.
c. Click Apply. (Multiple port profiles can be selected before clicking Apply.)
Step 4 To set a profile for all the ports on a card:
a. Click the Force all ports to profile menu arrow at the bottom of the screen.
b. Choose the appropriate Profile.
c. Click Force (still need to “Apply”)
d. Click Apply.
Tip If you choose the wrong profile, click Rese t to return to the previous profile setting.
Procedure: Apply an Alarm Profile at the Node View
Step 1 In CTC, display the node view.
Step 2 Click the Provisioning > Alarm Profiles tabs.
Step 3 To apply profiles on a card basis:
a. Click the Profile column for the card desired.
b. Choose the appropriate Profile.
c. Click Apply. (Multiple card profiles can be selected before clicking Apply.)
Step 4 To apply the profile to an entire node:
a. Click the Node Profile menu arrow.
b. Choose the appropriate Profile.
c. Click Apply.
Note The Port Overrides column at the node view reads true when additional profil es are a vailable
and false when only the inherited profile is available.
Tip If you choose the wrong profile, click Rese t to return to the previous profile.