8-14

Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter8 Performance Monitoring
Performance Monitoring for Electrical Cards
8.5 Performance Monitoring for Electrical Cards

The following sections define performance monitoring pa ram ete rs for t he E C1 , DS1 , DS 1N, DS 3 ,

DS3N, DS3-12E, DS3N-12E, and DS3XM electrical cards.

8.5.1 EC1 Card Performance Monitoring Parameters

Figure 8-11 shows signal types that support far-end PMs. Far-end performance monitoring is not

reported for EC1. Figure 8-12 shows where overhead bytes detected on the applic ation spec ific

integrated circuits (ASICs) produce performance monitoring par am eters fo r th e EC1 ca rd.

Figure8-11 Monitored signal types for the EC1 card
Note The XX in the illustration above represents all PMs listed below with the given prefix and/or suffix.
Figure8-12 PM read points on the EC1 card
55310
ONS 15454EC1 OC48FiberNear EndEC1 SignalEC1 Path (EC1 XX) Far End PMs Not SupportedONS 15454EC1OC48Far EndEC1 SignalSTS Path (STS XX-P) Far End PMs Not Supported
55304
ONS 15454
EC1 Card
LIU
Framer
BTC
Tx/Rx
XC10G Card OC-N
Line Side
Path
Level
SONET Side
STS CV-P
STS ES-P
STS FC-P
STS SES-P
STS UAS-P
CV-S
ES-S
SES-S
SEFS-S
CV-L
SES-L
ES-L
UAS-L
FC-L
PPJC-Pdet
NPJC-Pdet
PPJC-Pgen
NPJC-Pgen
PMs read on Framer